Most modern battery operated automatic spot welding equipment is constructed with extended life in mind, meaning you’ll get more years of service from it. They’re also generally made to last for several years, without compromising on the quality of work being done. Automatic welders come in a variety of sizes to match the needs of your work site. From the compact, easy to handle portable variety, to the overhead crane types, you can find almost any size you need.
There are two types of electrodes you can use with most of the available automatic spot welding equipment – steel and copper. While steel is the most commonly chosen, you may also have your employees use aluminum or even propane fueled electrodes if they have access to these sources on your job site. One advantage of using copper electrodes is that they tend to conduct heat a lot better than steel, and this can be a huge benefit during welding operations where you need to keep the welding area hot. You can also find some automatic welding products that use epoxy resins to prevent corrosion.
The two different types of electrodes you need to weld can be purchased separately. However, if you want to save money, you can buy one complete system and purchase all of the necessary components to make your own welds as well. That’s where the contrast fitting comes into play. This component consists of electrodes that are manufactured in a color that is close to that of natural steel but have the added benefit of not corroding as easily. Generally, you’ll find the contrast fitting sold in kits that include both the welds and electrodes.
When selecting automatic spot welding equipment for your business, there are several things you need to keep in mind. First, you should always consider safety when using welded electrodes. Always make sure the welds are placed as close as possible to each other, and that the electrodes don’t contact any surface when moving the tumbler. In addition to safety, you also need to ensure that the tumbler doesn’t move in such a way that it impairs your vision. A good rule of thumb is that if you can see the weld coming from the front (or back) you’re far more likely to get a good weld, but even though it may be difficult it’s important to get everything lined up correctly.
There are a few different types of these welders, and depending on your needs you’ll need to consider a few different things. For example, some businesses will typically use a smaller tumbler, which is useful if you only want to weld smaller items or objects. On the other hand, some businesses will use a larger tumbler due to the extra power and heat that it provides. Regardless of which tumbler you use, you’ll need to consider whether you’ll be able to use the weld in the event of an emergency. There are many automatic spot welding equipment options that have triggers that automatically close upon an emergency, so this may not be necessary for your particular business.
One of the most popular types of these welders is the Case Wrench, and the auto spot welding equipment most often uses one of two types of electrodes: metal or wire. These two types of electrodes are widely used because they provide the best strength and weld quality for these types of welds, although both of these electrodes require a special holder to hold them while in use. The most common size of electrodes for automatic spot welding equipment is ten gauge, although the smaller ones can still be found in use and being used by many companies. When choosing your electrodes, always look at both of these sizes and consider how often you’ll be using the welds, but also consider the cost of the equipment itself and the space you have available in your shop.